Shop Drawings
Ameripanel Homes Corporation is dedicated to
providing the highest quality in panelized home kits on the market.
Each of our standard manufactured home kits comes with a full set of
shop drawings which you will need in order to build your manufactured
dry-in shell. The shop drawing package includes floor plans,
framing plans, wall sections, header load tables, sealed
manufactured truss design packets, panel count and layout, and any other
drawings necessary for manufacturing your home. You will receive Four
(4) sets of drawings plotted on 11"x17" bright
white bond paper at 1/8" = 1'-0" scale; One (1)
for your builder, two (2) for the building department, and
one (1) for your own records. The standard package we provide
will be all you will need to build your manufactured home.
The following is a standard list of manufactured drawings we include
in our packages and their contents. Some designs may require
more than the standard and some may require less; every
home is different and we provide to suit specific needs.
Panelized Housing Floor Plans
- Space layout, dimension, and type
- Door and window sizes and locations
Ameripanel Manufactured Homes Foundation Plans
- Structural member specification and location for house
- Typical foundation wall section
- Diagonal dimension(s)
Roof Framing Housing Plans
- Truss specification, spacing, and type
- Manufacture Sealed truss design package (Mitek®)
- Overhang
- Slope
Floor Framing Plan (if applicable)
- Joist specification, spacing, and type
- Manufacturer's specifications (Weyerhaeuser®)
Ameripanel Manufactured Homes Panel Layout
- Panel dimensions and location
- Header specifications
- Window and door openings
- 3d view of panel layout (axonometric / isometric)
Typical Wall Section
- Specifications of wall construction
- Foundation type
- Insulation type with R rating
Miscellaneous Notes and Details
- General notes
- Miscellaneous framing details
Stamped Architectural Drawings
If our standard shop drawings are not sufficient to obtain a building permit and manufacture your home then for an additional fee we can also provide a complete set of stamped architectural drawings if your local code requires the seal of a professional. Such areas include the earthquake prone regions of California and the Pacific Coast, hurricane risk areas of Florida as well as both the Gulf and Carolina Coasts. Parts of New York, New Jersey, Nevada, Illinois and Virginia may also require review by a professional. If you are building in such an area, then the engineer will provide additional documentation such as energy calculations and any other relative information the building department specifies. We guarantee that the drawings we provide will pass code no matter the location. The drawing package includes site plan, floor plans, elevations, framing plans, electrical and piping layouts, wall sections, header load tables, manufacturers sealed truss design packets, panel count and layout, and any other drawings necessary for manufacturing your home. You will receive Four (4) sets of drawings plotted on 24"x36" bright white bond paper at ¼" = 1'-0" scale; One (1) for your builder, two (2) for the manufacture building department, and one (1) for your own records.
*Remember, our standard shop drawings are not full architectural
drawings and do not come with a professional seal. We have
business partnerships with engineers licensed in states
all over the country, and your manufacture building department may not
give you a permit without professional approval. If you
need these services, inform us immediately so that we may
begin processing your information. There also may be additional
information that you will have to provide, such as; a site
survey, soil test, and zoning ordinances. In some jurisdictions
only an architects' seal is acceptable (In this case if
our architects are not registered in your state, your plans
will have to be created and stamped locally.)
The following is a standard list of drawings and their
contents that we include in our drawings packages. Some
designs may require more than the standard and some may
require less; every home is different and we provide to
suit specific needs.
Ameripanel Manufactured Homes Site Plan
- Site location and address
- Building location on site
- Setback and building lines
- Power, water and sewer
- Site dimensions and elevations
Floor Plans
- Space layout, dimension, and type
- Door and window schedules with sizes and/or type
- Code related notes
Manufactured Homes Foundation Plan
- Structural member specification and location for house
and/or deck(s)
- Typical foundation wall section
- Diagonal dimension(s)
Elevations
- Roof material
- Siding
- Window and door locations
- Decks with steps
- Shifts in grade
Roof Framing Plan
- Truss specification, spacing, and type
- Manufactured Sealed truss design package (Mitek®)
- Overhang
- Slope
- Code related notes
Floor Framing Plan(if applicable)/Shearwall
Plan
- Joist specification, spacing, and type
- Code related notes
- Hold down and shear wall schedules
- Header specifications
Electrical Layout
- Location and type of switches, outlets, etc. and systems
- Wiring map
Piping Layout
- Path of pipes through structure
Panel Layout
- Panel dimensions and location
- Window and door openings
- 3d view of panel layout (axonometric / isometric)
Manufactured Homes Typical Wall Section
- Specifications of wall construction
- Foundation type and reinforcing
- Insulation type with R rating
Miscellaneous Notes and Details
- Stairway section and details
- General notes
- Floor plan notes
- Energy notes
- Roof notes
- Miscellaneous framing details
If you have any questions regarding the drawings we provide,
or if you would like to inquire about fees for engineering or manufacturing,
please contact us at 1-800-678-2183
|
It's
fabulous! SIPs are a proven technology that deserve much greater
application in the building industry.
